Login Register

H20PN-166 Series PTN Aggregation

Overview

H20PN-166 series compact PTN (Packet Transport Network) device from Beijing Huahuan Electronics Co., Ltd is applied to packet transmission network, using the MPLS-TP technology to meet the operator’s requirements for continuous growth and flexible scheduling of transmission network bandwidth.

H20PN-166 series,including H20PN-166-16GX-SP, and H20PN-166-4X.16GX-SP, can provide 4 10GE optical interfaces, 16 GE SFP Ethernetoptical ports, one 10/100/1000BASE-T RJ-45 electrical port as NM port, one RS232 as CONSOLE port, one 1PPS/TOD and one BITS interface as clock interface.

H20PN-166 series provides OAM and protection switching mechanism to realize fast fault detection, trigger protection switching and ensure the carrier-class QoS in packet transport network. With the QoS policy, the operators can provide different qualities of service to users to realize the integrated network of data, voice and videoservices.

H20PN-166 series supports IEEE 1588v2 protocol and the synchronous Ethernet technology, providing high precision time and clock information for the mobile backhauling.

Table 1.H20PN-166 series detailed difference

Device Type

10GE Optical Port

GE Optical Port

H20PN-166-16GX-SP

--

16

H20PN-166-4X.16GX-SP

4

16

Hardware Architecture

H20PN-166-4X.16GX-SP can provide 4 10GE interface(SFP+), 16 GE SFP Ethernet optical ports, one 10/100/1000BASE-T RJ-45 electrical port as NM port, one RS232 as CONSOLE port, one 1PPS/TOD and one BITS interface as clock interface.

H20PN-166-16GX-SP can provide 16 GE SFP Ethernet optical ports, one 10/100/1000BASE-T RJ-45 electrical port as NM port,one RS232 as CONSOLE port, one 1PPS/TOD and one BITS interface as clockinterface.

Features

l  Uses MPLS-TP technology and supports static LSP, MPLS-TP L2VPN, MPLS-TP OAM, MPLS-TPAPS;

l  Supports multiple services, including E-Line, E-LAN, E-Tree;

l  Supports QoS management, including port speed limit, port mirroring, priority trust, flow classification, flow behavior, flow policy, priority mapping, queue scheduling,congestion avoidance, traffic shaping, and traffic statistics;

l  Provides reliable protection mechanism, including ELPS, ERPS, Link Aggregation (manualLAG and static LACP), and STP/RSTP;

l  Support sprecise clock and time synchronous technology , including synchronous Ethernet and IEEE 1588 v2 protocol (PTP);

l  Provides Ethernet OAM protocols, including IEEE 802.3ah, IEEE 802.1ag and ITU-T Y.1731;provides standard OAM active mode and passive mode, OAM link discovery, OAM remote loopback and OAM link event;

l  Supports real-time SLA network detection which can collect statistics of response time,network jitter, delay, packet loss rate, through put and other network information;

l  IEEE802.1Q VLAN and IEEE802.1ad VLAN;

l  Interface loopback, Loop detection;

l  Jumbo frame setting (maximum 9720 bytes);

l  Flow control;

l  DDM;

l  MAC Address control;

l  ACL;

l  Broadcast storm repression;

l  Remotein-band monitoring management;

l  DHCP client and zero configuration;

l  Remote power failure alarm;

l  EzView NMS, SNMP and CLI;

l  NTP and RMON;

l  Upgrade of software through TFTP.

Specifications

10GE Base-R Interface

Interface  specifications

Complying  with IEEE802.3, IEEE 802.3ae, IEEE802.1Q, IEEE 802.1p, IEEE802.1ad,  IEEE802.1d,IEEE802.1w, IEEE802.3ad, IEEE802.3ah, IEEE802.1ag, Y1731

Interface  rate

10GE

Operation  mode

Auto-negotiation

Interface  connector

SFP+  socket

Interface  number

4

Average  output optical power

-11.5dBm~  -3dBm

Reception  sensitivity

≤-19dBm  (BER=1×10-10)

Minimum  overload point

> -3dBm

Transmission  wavelength and distance

Determined  by optical module

100/1000Base-FxInterface

Interface  specifications

Complying  with IEEE 802.3, IEEE-802.3z, IEEE802.1Q, IEEE 802.1p, IEEE802.1ad,  IEEE802.1d,IEEE802.1w, IEEE802.3ad, IEEE802.3ah,IEEE802.1ag, Y1731

Interface  rate

100M/1000M

Operation  mode

Auto-negotiation,1000M  full-duplex, 100M full-duplex

Interface  connector

SFP  socket

Interface  number

16

Average  output optical power

-10dBm~  -3dBm

Reception  sensitivity

≤-23dBm (BER=1×10-10)

Minimum  overload point

>  -3dBm

Transmission  wavelength and distance

Determined  by optical module

External Clock Input/output Port (BITS)

Clock  source

Internal  clock, NNI-port line clock, UNI-port line clock, external input clock.

External  clock input

2MHz,  2Mbit/s

External  clock output

2MHz,  2Mbit/s

Connector

RJ45  socket

External Time Synchronization Interface  (1PPS+TOD)

Electrical  specification

RS422

Interface  connector

RJ45  socket

Power Supply

Voltage

DC  -48V(-36V~-72V)

AC 220V  (100V~240V)

Consumption

≤40W

Operation  Environment

Working  temperature

-10ºC  ~50ºC

Storage  temperature

-40  ~70ºC

Relative  humidity

5%~85%(non-condensing)

Device

Size

W×D×H(mm):  440×258×44

Weight

≤4kg

Typical Application