Type

GE

Port

FE

Port

POTS

USB

Port

RF

Port

WiFi

H18GN-102

1

/

/

/

/

/

H18GN-103

4

/

2

/

/

/

H18GN-104

4

/

2

1

/

yes

H18GN-105

1

1

1

/

/

yes

H18GN-107

1

3

1

1

/

yes

H18GN-108

2

/

/

/

/

yes

H18GN-109

1

3

2

1

1

yes

Power Supply

Ø  +12V (feed via  external AC/DC adapter)

Ø  8-PIN power input with  UPS monitoring and 2-PIN power adaptor input

Ø  Dying Gasp support

Ø  Power switch

Working Environment

Ø  Temperature: 0℃ ~ 40℃

Ø  Humidity: 5% ~ 95%  relative humidity

GPON Interface

Ø  Compliant with ITU-T  G.984 GPON standards

Ø  SFF type laser, SC/APC  connector

Ø  1.244 Gbps Burst Mode  Upstream Transmitter

Ø  2.488 Gbps Downstream  Receiver

Ø  Compliant with ITU-T  G.984.2 Amd1, Class B+

Ÿ   0.5dBm ~+5dBm launch  power, -27dBm sensitivity, and -8dBm overload

Ø  Wavelengths:

Ÿ   US 1310nm, DS 1490nm

Ø  Laser compliant with  FCC 47 CFR Part 15, Class B, and FDA 21 CFR 1040.10 and 1040.11, Class I, ONT  support Class C or Class C+ optics as an option

Ø  Support G.984.5  Blocking Filter as an option

Ø  Multiple T-CONTs per  device

Ø  Multiple GEM Ports per  device

Ø  Flexible mapping  between GEM Ports and T-CONT

Ø  Activation with  automatic discovered SN and password in conformance with ITU-T G.984.3

Ø  AES-128 Decryption  with key generation and switching

Ø  FEC (Forward Error  Correction) in both directions

Ø  DBA reporting by  piggyback reports in the DBRu (mode 0 and mode 1)

Ø  802.1p mapper service  profile on U/S

Ø  Mapping of GEM Ports  into a T-CONT with priority queues based scheduling

Ø  Support Multicast GEM  port and incidental broadcast GEM port.

Ethernet Interface

Ø  10/100 Base-T interface  with RJ-45 connectors

Ø  Ethernet port auto  negotiation or manual configuration

Ø  MDI/MDIX automatically  sense

Ø  Hardware priority  queues on the downstream direction in support of CoS

Ø  802.1D bridging

Ø  Virtual switch based  on 802.1q VLAN

Ø  VLAN tagging/detagging  per Ethernet port

Ø  VLAN stacking (Q-in-Q)  and VLAN Translation

Ø  IP ToS/DSCP to 802.1p  mapping

Ø  Class of Service based  on UNI, VLAN-ID, 802.1p bit, ToS/DSCP

Ø  Marking/remarking of  802.1p

Ø  IGMP v2/v3 snooping

Ø  Broadcast/Multicast  rate limiting

Gateway Interface

Ø  Multiple WAN  interfaces supporting

Ø  WAN connection

Ÿ   Point-to-Point  Protocol over Ethernet (PPPoE)

Ÿ   Dynamic Host Configuration  Protocol (DHCP)

Ÿ   Static

Ø  DHCP server for LAN  devices

Ø  DNS relay

Ø  Network Address  Translation (NAT) / Network Address Port Translation (NAPT)

Ø  Port forwarding

Ø  Static routing

Ø  Traffic classification  and QoS based on Layer 3 and Layer 4 Identifier

Ø  Access Control List  (ACL)

Ø  VPN Pass thru for  Point to Point Tunneling Protocol (PPTP),  Layer 2 Tunneling  Protocol (L2TP) and IP Security Protocol (IPSec)

Ø  Firewall

Ø  Application Layer  Gateway (ALG)

Ø  Demilitarized Zone  (DMZ)

Ø  Dynamic Domain Name Server (DDNS)

Ø  Network Time Protocol (NTP)

Ø  Universal Plug and Play (uPnP)

Ø  IGMP proxy

Ø  IPv6

Ÿ   Stateless Address  Autoconfiguration (SLAAC)

Ÿ   DHCPv6

Ÿ   PPPoEv6

Ÿ   DNSv6

WLAN Interface

Ø  Compliant with IEEE  802.11 b/g/n

Ø  2.4GHz

Ø  MIMO:2x2

Ø  Multiple SSIDs

Ø  64 and 128 bit  Wireless Encryption Protocol (WEP) support

Ø  Wireless Protected  Access support including Pre Shared Key (WPA-PSK)

Ø  Radio switched on/off  function Support WPS

POTS Interface

Ø  RJ-11 connectors

Ø  5-REN

Ø  Balanced Ring, 55V RMS

Ø  DTMF Dialing and Pulse  Dialing

Ø  Multiple Codecs:

Ÿ   G.711 (μ-law and  A-law)

Ÿ   G.729 (A and B)

Ÿ   G.723.1

Ø  Echo Cancellation

Ø  Voice Activity  Detection and Comfortable Noise Insertion

Ø  SIP (RFC3261)

Ø  MEGACO v2 (H.248)

Ø  SDP (RFC2327)

Ø  RTP (RFC3550/3551)

Ø  DTMF encoding by RFC  2833 or SIP INFO method

Ø  Support various CLASS  services - Caller ID, Call Waiting, Call Forwarding, Call Transfer, Call  Toggle, Three Way Calling, Distinctive Ringing, etc.

Ø  G.711 for FAX, modem  connection

Ø  T.38 FAX

Ø  Configurable dial plan

Ø  Country specific ring  tone generation

Ø  DHCP Client or static  IP configuration

Ø  Metallic Loop Testing

Analog Video Interface

Ø  Standard F-Type  connector

Ø  Analog RF video over  dedicated 1550nm wavelength

Ø  RF output level of +17  dBmV

Ø  RF Passband: 47 MHz~ 1000MHz

Ø  Optionally remote band  control function:

Ÿ   Basic services: 47MHz - 870MHz

Ÿ   Premium services:  47MHz - 1000MHz, pass or block, software provisionable

Ø  Switched on/off by  remote control

USB Interface

Ø  1 USB Host interface

Ø  Compliant to USB 2.0

Ø  Network storage

OAM

Ø  Standard compliant  OMCI (the embedded operations channel) interface as defined by ITU-T G.988

Ø  Compliant to TR-069

Ø  Provisioning all kinds  of services including Ethernet, WLAN,   VoIP,  and RF, etc. by subset of  TR-098 and TR-104

Ø  Provision RF service  over OMCI

Ø  Alarming and AVC  report, performance monitoring

Ø  Remotely software  image download over OMCI, as well as activation and rebooting

Ø  Hold two software sets  with software image integrity checking and automatic rollback