Login Register

H0FL-EthMux SA16/SAP16 Series TDM over IP CPE

Product Overview

As a cost effectivesolution for the traditional telecom services migrate to the IP packetnetworking technology, H0FL-EthMux SA16/SAP16 Series adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 1 /2 /4 /8 /16 E1/T1 over FE port.The uplink ports and user data ports are IEEE 802.3 compliant, 10/100auto-sensed Ethernet ports.

State-of-the-art design provides the highest availability with the accurate timing signal and data bitstream reconstruction. Predefined system parameter profiles that according to different application requirement, ultimately simplify the installation process and saving the maintenance cost.

Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1 services. One particular application is to build E1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios.Operators can use H0FL-EthMux SA16/SAP16 Series to provide legacy TDM services over wired or wireless packet network.

Table-1 H0FL-EthMux.SA16 Series Device Models

Type

E1/T1 Port Qty

100Base-Tx Electrical Port Qty

100Base-Fx Optical Port Qty

Remarks

H0FL-EthMux.SA1601

1

4

1

H0FL-EthMux.SA1602

2

4

1

H0FL-EthMux.SA1604

4

4

1

H0FL-EthMux.SA1608

8

4

1

H0FL-EthMux.SA16

16

4

1

H0FL-EthMux.SAP1601

1

4

1

2 uplink  electrical ports support POE function

H0FL-EthMux.SAP1602

2

4

1

H0FL-EthMux.SAP1604

4

4

1

H0FL-EthMux.SAP1608

8

4

1

H0FL-EthMux.SAP16

16

4

1

Hardware Architecture

H0FL-EthMux.SA1601/SA1602

H0FL-EthMux.SA1604


H0FL-EthMux.SA1608

H0FL-EthMux.SA16

Specifications

System Parameters

100Base-Tx Ethernet
 Electrical Interface

4*100Base-Tx electrical ports (2 for uplink, 2  for local data, 1 local data port can be used as monitoring port)  and 1*100Base-Fx optical port

100Base-Fx Ethernet
 Optical Interface

1

E1/T1 Interface

1, 2, 4, 8, 16

E1/T1 Interface Features

E1/T1 Interface

Complies with ITU-T G.703  recommendation

Point-to-point single way  additional processing delay (minimum delay setting)

≤ 10ms

Output frequency stability  (adaptive timing, stable)

≤5ppm

Output jitter (adaptive timing)

≤0.1UI

Interface impedance

E1-120W/T1-100W; 75W

Connector

RJ-48C or dual-E1

Ethernet Port

Related protocols

Complies with IEEE 802.3,  802.1Q, 802.1ad, 802.1P recommendation

Working mode

Electrical ports support auto-negotiation,  manual 10M/100M, half-duplex/ full-duplex Optical ports support manual 100M full-duplex

Maximum packet
 length

2000 bytes

Connector

100M electrical port:  RJ45

100M optical port: LC

POE

PoE function

Provided by uplink ports  of H0FL-EthMux. SAP16 series device

PoE mode

MS (Mid-span PSE); ES  (Endpoint PSE

Voltage

H0FL-EthMux.SAP1602.MS2410:  24V

Other H0FL-EthMux.SAP16  series devices: 55V

Power

H0FL-EthMux.SAP1602.MS2410:  24W

Other H0FL-EthMux.SAP16  series devices: 50W

Power Supply

AC

~220V (100~240V, 50/60Hz)

DC

-48V (-36~-72V)

Consumption

≤7.7W

Working Environment

Temperature

-5~ 45°C

Relative Humidity

≤90% (non-condensing)

Dimension (W x H x D)

H0FL-EthMux.SA1601/SA1602

195 x 35 x 140 (mm)

H0FL-EthMux.SAP1602.MS2410

440 x 44 x 175 (mm)

H0FL-EthMux.SA16 series

440 x 44 x 136.5 (mm)

SAP16 series devices (except  H0FL-EthMux.SAP1602.MS2410)

440 x 44 x 135 (mm)

Typical Application

l  Point to point application


l  Point to multipoint application