Products Guide
H0FL-EthMux SA16/SAP16 Series TDM over IP CPE
Product Overview
As a cost effectivesolution for the traditional telecom services migrate to the IP packetnetworking technology, H0FL-EthMux SA16/SAP16 Series adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 1 /2 /4 /8 /16 E1/T1 over FE port.The uplink ports and user data ports are IEEE 802.3 compliant, 10/100auto-sensed Ethernet ports.
State-of-the-art design provides the highest availability with the accurate timing signal and data bitstream reconstruction. Predefined system parameter profiles that according to different application requirement, ultimately simplify the installation process and saving the maintenance cost.
Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1 services. One particular application is to build E1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios.Operators can use H0FL-EthMux SA16/SAP16 Series to provide legacy TDM services over wired or wireless packet network.
Table-1 H0FL-EthMux.SA16 Series Device Models
Type | E1/T1 Port Qty | 100Base-Tx Electrical Port Qty | 100Base-Fx Optical Port Qty | Remarks |
H0FL-EthMux.SA1601 | 1 | 4 | 1 |
|
H0FL-EthMux.SA1602 | 2 | 4 | 1 |
|
H0FL-EthMux.SA1604 | 4 | 4 | 1 |
|
H0FL-EthMux.SA1608 | 8 | 4 | 1 |
|
H0FL-EthMux.SA16 | 16 | 4 | 1 |
|
H0FL-EthMux.SAP1601 | 1 | 4 | 1 | 2 uplink electrical ports support POE function |
H0FL-EthMux.SAP1602 | 2 | 4 | 1 | |
H0FL-EthMux.SAP1604 | 4 | 4 | 1 | |
H0FL-EthMux.SAP1608 | 8 | 4 | 1 | |
H0FL-EthMux.SAP16 | 16 | 4 | 1 |
Hardware Architecture
H0FL-EthMux.SA1604
H0FL-EthMux.SA1608
H0FL-EthMux.SA16
Specifications
System Parameters | 4*100Base-Tx electrical ports (2 for uplink, 2 for local data, 1 local data port can be used as monitoring port) and 1*100Base-Fx optical port | |
100Base-Fx Ethernet | 1 | |
1, 2, 4, 8, 16 | ||
E1/T1 Interface Features | E1/T1 Interface | Complies with ITU-T G.703 recommendation |
Point-to-point single way additional processing delay (minimum delay setting) | ≤ 10ms | |
Output frequency stability (adaptive timing, stable) | ≤5ppm | |
Output jitter (adaptive timing) | ≤0.1UI | |
Interface impedance | E1-120W/T1-100W; 75W | |
Connector | RJ-48C or dual-E1 | |
Ethernet Port | Related protocols | Complies with IEEE 802.3, 802.1Q, 802.1ad, 802.1P recommendation |
Working mode | Electrical ports support auto-negotiation, manual 10M/100M, half-duplex/ full-duplex Optical ports support manual 100M full-duplex | |
Maximum packet | 2000 bytes | |
Connector | 100M electrical port: RJ45 | |
100M optical port: LC | ||
POE | PoE function | Provided by uplink ports of H0FL-EthMux. SAP16 series device |
PoE mode | MS (Mid-span PSE); ES (Endpoint PSE | |
Voltage | H0FL-EthMux.SAP1602.MS2410: 24V Other H0FL-EthMux.SAP16 series devices: 55V | |
Power | H0FL-EthMux.SAP1602.MS2410: 24W Other H0FL-EthMux.SAP16 series devices: 50W | |
Power Supply | AC | ~220V (100~240V, 50/60Hz) |
DC | -48V (-36~-72V) | |
Consumption | ≤7.7W | |
Working Environment | Temperature | -5~ 45°C |
Relative Humidity | ≤90% (non-condensing) | |
Dimension (W x H x D) | H0FL-EthMux.SA1601/SA1602 | 195 x 35 x 140 (mm) |
H0FL-EthMux.SAP1602.MS2410 | 440 x 44 x 175 (mm) | |
H0FL-EthMux.SA16 series | 440 x 44 x 136.5 (mm) | |
SAP16 series devices (except H0FL-EthMux.SAP1602.MS2410) | 440 x 44 x 135 (mm) |
Typical Application
l Point to point application
l Point to multipoint application